![background image](http://html1.mh-extra.com/html/barco/icon-h250/icon-h250_installation-manual_4237633010.webp)
2. Hard disk recovery procedure
Image 2-8
Note:
You will see appear the following message:
mount: block device /dev/sr0 is write-protected, mounting read-only
3. At the prompt, enter the following text:
partimage
Image 2-9
4. Navigate to the item
Image file to create/use
using the
tab
key and enter the following text:
/mnt/cdrom/iconh400.000
Image 2-10
Note:
iconh400.000 is the name of the file with the firmware and data. It may differ depending on the version and the projector
type you are recovering!
5. Press
tab
6. Use
↓
and the
space bar
to select the item
Restore partition from an image file
7. Press
F5
, verify the partition description and use the
space bar
to close the window
8
R59770070 ICON H250 / ICON H400 31/01/2007
Summary of Contents for iCon H250
Page 1: ...iCon H250 iCon H400 Installation manual R9010510 R9010500 R59770070 00 31 01 2007...
Page 4: ...Table of contents 2 R59770070 ICON H250 ICON H400 31 01 2007...
Page 6: ...1 Hard disk recovery kit 4 R59770070 ICON H250 ICON H400 31 01 2007...
Page 14: ...2 Hard disk recovery procedure 12 R59770070 ICON H250 ICON H400 31 01 2007...