![background image](http://html.mh-extra.com/html/barco/hdx-4k/hdx-4k_user-manual_474162020.webp)
2. Installation preparations
AUDIENCE
BACKSTAGE
R/C
FLOOR
SCREEN
Image 2-7
Rear projection, ceiling mounted in table position
Positioning the projector
FLOOR
SCREEN
SCREEN
PD
A
CD
SCREEN
SW
SW
SH
B
SH
B
CD
Image 2-8
Positioning projector
The projector should be installed at right angles (horizontally and vertically) to the screen at a distance PD. Note the distance (A)
between lens centre and table surface is slightly variable. This distance (A) is nominal 35 cm in case all feet are turned in completely
and the vertical lens shift is set to zero (0).
On axis / off axis projection
The position of the projector with reference to the screen may also be different depending on the installation. Basically the projector
can be positioned in On-Axis or Off-Axis con
fi
guration. On-Axis con
fi
guration means that the projector is positioned so as to have
the centre of the lens coinciding with the centre of the screen. Off-Axis projection is obtained by shifting the lens up, down, left or
right. Several parameters can be calculated determining the position in any installation.
Formula to calculate the distance CD for On-Axis projection:
CD = SH/2 + B - A
16
R5906070 HDX 4K 23/09/2016
Summary of Contents for HDX 4K
