![background image](http://html1.mh-extra.com/html/barco/hdf-w30lp/hdf-w30lp_user-and-installation-manual_4170176111.webp)
12. Start up of the adjustment mode
Use the
◄
or
►
key to adjust the current value.
The bar scale will move accordingly.
Press
EXIT
to
fi
nalize the adjustment.
or,
When the bar scale is displayed, via direct input. Press
ENTER
to activate the input
fi
eld.
Enter the desired value with the digit keys. Press
ENTER
to accept.
Press
EXIT
to
fi
nalize the adjustment.
12.5 Menu memory
Overview
Each menu with sub menus, remembers its last selected sub item even when leaving the menu structure and that as long as the
projector is running. When restarting the projector from stand-by, the menu memory is reset.
After re-opening the main menu and selecting an item, the previous selected sub item of that selected item is highlighted and can
be opened just by pressing
ENTER
.
12.6 Shortcut keys to the menus
About a shortcut key
The digit keys 5 to 9 can be customer programmed to directly open a pre-stored menu. That menu can be any independent menu
out of the list of menus. A menu which is built up by the content of a previous menu cannot be stored behind a shortcut.
How to use a shortcut key
While in the operational mode, no menu selected, just press on the desired digit key to open the menu behind that shortcut key.
How to create a shortcut key
Scroll to the desired menu. Press the digit key behind which the menu must be stored for 5 seconds. When the creation is success-
fully, a con
fi
rmation message appears on the screen. E.g. :
Image 12-4
Select
Yes
to con
fi
rm the creation.
To erase the shortcut, navigate to
Projector Control
→
Buttons
.
12.7 Test patterns in adjustment mode
Overview
When the adjustment mode is started, a test pattern can be called at any moment just by pressing the
Pattern
key on the RCU or the
local key path. Press as many times on the
Pattern
key as necessary to display the desired test pattern. The test pattern remains
on the screen as long as the adjustment mode is selected, even when selecting other menus. When leaving the adjustment mode,
the selected test pattern is cleared and the normal image is displayed again.
R5906730 HDF WLP SERIES 01/08/2017
107
Summary of Contents for HDF-W30LP
