![background image](http://html1.mh-extra.com/html/barco/hdf-w22/hdf-w22_user-and-installation-manual_4170864128.webp)
8. Input
8.8.2
Create custom EDID
fi
le
Description
You can create new custom EDID
fi
les and enter the desired input timings.
How to create
1. Press
Menu
to activate the menus and select
Input
→
EDID
→
Create
.
2. Press
ENTER
to open the EDID creation menu.
Image 8-44
Main menu
Image 8-45
Input, EDID
Image 8-46
EDID, create
Image 8-47
EDID
fi
le creation
3. Use the
▲
or
▼
key to select
Create
.
Press
ENTER
to open the creation menu.
4. Fill out the
Timings
section.
Use the
▲
or
▼
key to select a setting.
Use the
◄
or
►
key to change the value
or press
ENTER
to open the speci
fi
c adjustment menu. Follow the adjustment method as described in "Navigation and adjust-
ments", page 93.
The following timings must be entered:
-
Active Pixels
: horizontal resolution
-
Active Lines
: vertical resolution
-
Frequency
(Hz): amount of frames per second
5. Select the calculation method to obtain the correct (standard) video timings.
Possible selections:
-
CVT
: Coordinated Video Timings
-
CVT RB
: Coordinated Video Timings Reduced Blanking
-
CVT MB
: Coordinated Video Timings Minimum Blanking (not a standard)
-
GTF
: Generalized Timing Formula
6. Select the
Options
.
124
R5905158 HDF SERIES 08/12/2016
Summary of Contents for HDF W22
