![background image](http://html1.mh-extra.com/html/barco/hdf-w-series/hdf-w-series_service-manual_474148206.webp)
13. HDF Light Processor
13.5 Replacement of the shutter
Dowser assembly
The shutter of the projector is mounted upon the Light Processor just above the light output path of the prism. The shutter assembly
has an “open” and a “close” state. In the “close” state the shutter blade shuts off the light beam between the Light Processor (DMD’s)
and the lens. In the “open” state, the shutter is retracted from the light beam. Note that the local keypad has a dedicated button
“SHUTTER” to operate the shutter.
The Light Processor has to be removed from the projector before replacing the dowser. This procedure as-
sumes that the Light Processor is already removed from the projector.
Necessary tools
2,5 mm Allen wrench.
How to replace the dowser of the Light Processor
1. Disconnect the wire unit of the shutter.
Image 13-16
Dowser connection
2. Remove the shutter assembly from the Light Processor by releasing both hexagon socket head cap screws (reference 1 im-
age 13-17). Use a 2,5 mm Allen wrench.
1
Image 13-17
Remove
fi
xation screws
3. Place a new shutter assembly in position and fasten with two hexagon socket head cap screws (reference 1 image 13-18). Use
a 2,5 mm Allen wrench.
202
R5905312 HDF W SERIES 24/01/2013
Summary of Contents for HDF W series
