![background image](http://html1.mh-extra.com/html/barco/hdf-w-series/hdf-w-series_service-manual_474148119.webp)
7. Power Input
7.6
Mounting the new mains switch
How to mount
1. Slide the new mains switch from the inside of the projector through the cabinet. Make sure that the indication “1” (on state) points
to the top of the projector.
a
b
c
d
Image 7-10
Mounting mains switch
2. Turn in both screws on the outside of the projector.
3. Turn out the
fi
rst bottom screw (a), slide a lock washer, followed by a washer over the screw. Then slide the
fi
rst eye connector
coming from the mains input also over the screw followed by the eye connector coming from the voltmeter. Turn in the screw
and tighten completely.
4. Turn out the next bottom screw (b), slide a lock washer, followed by a washer over the screw. Then slide the
fi
rst eye connector
coming from the mains input also over the screw followed by the eye connector coming from the voltmeter. Turn in the screw
and tighten completely.
5. Turn out the
fi
rst top screw (c), slide a lock washer, followed by a washer over the screw. Then slide the eye connector coming
from the mains
fi
lter over the screw. Turn in the screw and tighten completely.
6. Turn out the
fi
rst top screw (d), slide a lock washer, followed by a washer over the screw. Then slide the eye connector coming
from the mains
fi
lter over the screw. Turn in the screw and tighten completely.
7. Reinstall the removed covers..
R5905312 HDF W SERIES 24/01/2013
115
Summary of Contents for HDF W series
