![background image](http://html1.mh-extra.com/html/barco/hdf-w-series/hdf-w-series_installation-manual_474143034.webp)
3. Physical installation
Scheimp
fl
ug adjustment points
4
1
2
3
d
D
c
C
A
a
B
b
Image 3-29
Scheimp
fl
ug adjustments
Indication on drawing
Function
4
Locking nut
1, 2 and 3
Scheimp
fl
ug adjustment nuts
A, B, C and D
Set screws
a, b, c and d
lock nuts
1, 2 and 3 are adjustment points.
4 is a locking point and NOT used during Scheimp
fl
ug adjustment.
Necessary tools
•
Allen key 3 mm
•
Nut driver 13 mm
•
Nut driver 10 mm
How to adjust
1. Project a green focus pattern. (image 3-30)
2. Loosen the lock nuts (a, b, c and d). See image 3-29.
3. Loosen the 4 set screws (A, B, C and D) by 1 cm. See image 3-29.
4. Fully loosen lock nut 4. See image 3-29.
5. Optimize the focus of the projected image as follows:
a) Place the zoom lens in TELE position (smallest projected image) and adjust the focus using the lens focus barrel or motorized
focus control.
b) Place the zoom lens in WIDE position (largest projected image) and adjust the focus by turning equally on nut 1, 2 and 3.
c) Repeat steps “a” and “b” until the projected image is as sharp as possible. (image 3-31)
6. Sharpen bottom left corner of the screen by adjusting nut 1. (image 3-32)
7. Sharpen bottom right corner of the screen by adjusting nut 2. (image 3-33)
8. Sharpen top right corner of the screen by adjusting nut 3 (image 3-34)
9. Repeat from step 6 until the projected focus pattern is as sharp as possible in the center, left, right, top and bottom of the screen.
30
R5905158 HDF W SERIES 10/07/2012
Summary of Contents for HDF W series
