![background image](http://html1.mh-extra.com/html/barco/galaxy-warp-r9040320/galaxy-warp-r9040320_owners-manual_4159942027.webp)
4. Connections
Pin 9
TMDS DATA1-
Pin 21
TMDS DATA5+
Pin 10
TMDS DATA1+
Pin 22
TMDS Clock Shield
Pin 11
TMDS DATA1/3 Shield
Pin 23
TMDS Clock+
Pin 12
TMDS DATA3-
Pin 24
TMDS Clock-
How to select DVI on Input 2?
1. Press the
2
key on the RCU or Local Keypad.
4.5.4
Inputs via RCVDS05
Overview
When using a RCVDS05, the input configuration must be as follows:
Slot 1
RGB/Component
Slot 2
Not Used
When using a RCVDS05, it is recommended to use a 5-cable output module in the RCVDS. The outputs of this module has to be
connected to slot 1 of the projector.
4.6 Communication Connections
Overview
•
•
•
Communication with peripherals
4.6.1
Linked System
C
AUTION
:
Always use the Barco COM 800 Splitter, R9827941 (240V) or R9827948 (110V), when using the COM
800 protocol.
What can be done?
In a complex multi-channel setup, projectors can be controlled using the RS232 or COM800 Protocol.
CLO and Dynacolor™ can be controlled by both protocols, however by using the COM800 port for these 2 adjustments, the RS232
Port can still be used for general RS232 commands.
The following procedures will describe how to connect a RS232 Linked System and a COM800 Linked System.
How to connect a RS232 Setup?
1. Connect a Null Modem connector to the RS232 Input of the master–projector. (image 4-4)
2. Connect the output of the Null Modem connector to the RS232 Input of the first slave–projector (image 4-4).
3. Continue by connecting the RS232 Output of the first slave-projector to the RS232 Input of the second slave–projector (im-
4. Continue this daisy chain connection to connect all slave–projectors (image 4-4).
R5976570 BARCO GALAXY WARP™ 25/03/2004
23
Summary of Contents for Galaxy WARP R9040320
