![background image](http://html1.mh-extra.com/html/barco/galaxy-warp-r9040320/galaxy-warp-r9040320_owners-manual_4159942139.webp)
8. Service Mode
How to Start Up the Lamp Menu?
1. Push the cursor key
↑
or
↓
to highlight
Lamp.
2. Press
ENTER
to select.
The Lamp Menu will be displayed. (menu 8-14)
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
LAMP
MORE ...
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 8-13
LAMP
CONSTANT LIGHT OUTPUT [MASTER]
MODE [NORMAL]
_________________________________
Serial number :
003706
Article number :
R9840740
Run time :
140 hours
Remaining run time :
1360
hours
Number of strikes :
160
Z-axis :
100 units
_________________________________
Select with
↑
or
↓
<ENTER> to toggle
<EXIT> to return
Menu 8-14
8.8.2
Constant Light Output (CLO)
What can be done?
Projectors in a multichannel setup may have different Lamp Runtimes, this will result in a difference in light output between the
projectors.
Within this menu it is possible to track and maintain the brightness levels of the projectors, the projectors will deliver a Constant Light
Output = CLO.
In a multichannel setup (max 12.) it is possible to link the CLO–values of all projectors, this is done by means of a master–slave
projector setup. One projector will act as master, all slave–projectors will track and maintain the CLO setting of this master–projector.
All projectors must have a different projector address between 1 and 12.
All projectors must have the same Baudrate.
The CLO setting of one projector must be in the master position, all others must be in the slave position.
How to Connect the Master–Slave Projectors?
1. Connect a RS232 Terminator (Order number
Z3498823
) to the ’RS232 In’ Input of the first projector in the chain.
2. Connect the RS232 Output of the first projector in the chain to the RS232 Input of the next projector.
3. Continue this daisy chain connection to connect all projectors in the set up.
How to Change the Constant Light Output Setting?
1. Push the cursor key
↑
or
↓
to highlight
Constant Light Output.
2. Press
ENTER
to toggle between the different CLO settings.
Following CLO Settings are available:
[MASTER]
Master projector to control the CLO in a chain of projectors
[SLAVE]
Follows the master projector to adjust the CLO
[OFF]
Fixed power, no power adaptation
Table 8-2
CLO Settings
LAMP
CONSTANT LIGHT OUTPUT [MASTER]
MODE [NORMAL]
_________________________________
Serial number :
003706
Article number :
R9840740
Run time :
140 hours
Remaining run time :
1360
hours
Number of strikes :
160
Z-axis :
100 units
_________________________________
Select with
↑
or
↓
<ENTER> to toggle
<EXIT> to return
Menu 8-15
R5976570 BARCO GALAXY WARP™ 25/03/2004
135
Summary of Contents for Galaxy WARP R9040320
