Barco Galaxy WARP 7 HC, Owner'S Manual

Page: 117 / 154

6. Random Access
We advise to set Invert Stereo ON, one frame delay is inherent to DLP technology.
Image
Frame Left
Stereo Sync
Left
Right
Frame Left Frame Right
With Invert Stereo Adjustment
Stereo Sync
Left
Right
Without Invert Stereo Adjustment
t
Image 6-57
Invert Stereo Adjustment
How to activate Invert Stereo?
1. Push the cursor key ↑ or ↓ to highlight
Invert Stereo
. (menu 6-144)
2. Press
ENTER
to toggle between [YES] or [NO].
3. Press
EXIT
to return to the
Stereo Options
menu.
STEREO OPTIONS
STEREO PHASE
INVERT STEREO [YES]
MASTER CHANNEL [LEFT]
STEREO MODE [ACTIVE]
DARK TIME
FORCED ASYNCHRONOUS [NO]
WARNING
All projectors in the chain
must have the same setting
for Asynchronous Mode !
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 6-144
6.6.4 Master Channel
What can be done?
The Stereo IG will always provide a left + right image to the projector.
It is possible to force the projector into mono mode, by setting the Stereo Mode to Passive, only the left or the right image is displayed,
Use the
Master Channel
menu to select either the
Left
or the
Right
image, this Master Channel will be displayed when the Stereo
Mode is set to Passive.
R5976755 BARCO GALAXY WARP™ 7 HC 05/04/2004 113