Barco Galaxy NW-7, User Manual

Page: 142 / 220

7. Advanced
7.9.7 Dynacolor
Overview
• Introduction
• Choosing DynaColor sets
• Enabling DynaColor
• Linking DynaColor
• Matching In fi tec A and In fi tec B
• Changing color reproduction
• Black Color Matching
7.9.7.1 Introduction
Introduction
This chapter is an introduction to DynaColor™ in Galaxy NW-xx projectors and how to operate DynaColor™ in single and multiple
projector setup.
About DynaColor™
DynaColor™ provides the ultimate electronic fi ne tuning to digitally set the primary and secondary color coordinates to obtain perfect
color matching across a system. Part of DynaColor™ is the improved grayscale tracking controlling the black, white and grays across
the different channels of the multi-channel setup.
DynaColor™ eliminates channel-to-channel color variations or, in case of a single projector, forces a desired color reproduction.
The CIE chromaticity diagram is one way to plot the colors the human eye can see.
Image 7-156
The CIE chromaticity diagram
A projector can only reproduce a certain color gamut within this diagram. This color gamut is de fi ned by the triangle formed by the
x, y coordinates of Red, Green, and Blue. These parameters are used by the DynaColor™ adjustment in the projector.
Image 7-157
The projector color gamut is de
fi ned by the triangle formed by the x, y coordinates of Red Green and Blue
138 R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013