![background image](http://html1.mh-extra.com/html/barco/galaxy-nh-12/galaxy-nh-12_service-manual_3838748093.webp)
7. Electronic parts and servicing procedures
Image 7-110
Desktop input unit:
fi
xing screws
7.9
LCD module
Description of the LCD module
The LCD module is
fi
xed to the desktop input unit.
This LCD panel displays messages coming from the processor on the PMP.
Necessary tools
Torx screwdriver T10
How to remove the LCD module?
1. Remove the desktop input unit (see chapter
Desktop input board
)
2. Disconnect the LCD from the desktop input board:
-
J300: data to the LCD module
-
J301: backlight to the LCD module
3. Remove the screws
fi
xing the LCD module to the desktop input module
Image 7-111
LCD module:
fi
xing screws
4. Remove the LCD module
How to install the LCD module?
1. Put the LCD module in the correct position and
fi
x it using four screws
R59770141 GALAXY NH-12 20/02/2008
89
Summary of Contents for Galaxy NH-12
