![background image](http://html1.mh-extra.com/html/barco/galaxy-nh-12/galaxy-nh-12_service-manual_3838748129.webp)
8. Optical parts and servicing procedures
Image 8-19
In
fi
tec
fi
lter wheel assembly:
fi
xing screw
3. Make sure the assembly is well aligned and tighten the spacer bolt to
fi
x this position
Image 8-20
In
fi
tec
fi
lter wheel assembly: spacer bolt
4. Connect the In
fi
tec
fi
lter wheel assembly to the engine controller:
-
connector J1: In
fi
tec sensor
-
connector J2: In
fi
tec slide motor
-
connector J7: In
fi
tec switch
-
connector J10: power
5. Install the rear cover (see concerning chapter)
8.5
In
fi
tec
fi
lter
Overview
•
8.5.1
Description of the In
fi
tec
fi
lter
Description
To generate passive stereoscopic images, the optional
In
fi
tec
fi
lter
can be used. Two projectors are needed, each of them having a
different In
fi
tec
fi
lter: one type of
fi
lter for the left image and an other type of
fi
lter for the right image.
The difference between both In
fi
tec
fi
lters is clearly indicated by its respective colors: one will be reddish, the other one greenish.
The In
fi
tec
fi
lter can be moved into the light path or it can be moved out through the OSD commands.
THIS OPTION IS NOT AVAILABLE YET!
R59770141 GALAXY NH-12 20/02/2008
125
Summary of Contents for Galaxy NH-12
