![background image](http://html1.mh-extra.com/html/barco/g62/g62_installation-manual_4153674043.webp)
43
R5914654 /04
G62 series
3.7 Remove the non-UST boresight module
How to remove
1.
Remove the non-ultra short throw (non-UST) lens.
2.
Disconnect the lens cable (see red reference) in LSM type1.
LSM type1
LSM type2
Image 3–9
3.
Remove the screws (inside red circles) securing the non-UST lens boresight plate with a Philips #2
screwdriver.
LSM type1
LSM type2
Image 3–10
Note:
To have better visibility for the lens holder, you can stand the projector with the lens opening
facing up.
4.
Remove the non-UST lens boresight module from the projector.
Summary of Contents for G62
