![background image](http://html2.mh-extra.com/html/barco/g50/g50_installation-manual_3054236035.webp)
35
R5916677 /00
G50
1
2
Image 3–4
1
2
Image 3–5
3.
Snap the first loop end of the safety cable into one of the following clips and let the loop end point
downwards.
1. Configuration A: Use the upper clip on the side of the cable bundle (reference 2,
).
2. Configuration B: Use the upper clip on the non-wired side (reference 2,
4.
Slide the rest of the cable around the lens counterclockwise. Click the cable into every clip it passes in this
loop.
Note:
Make sure the cable passes between the lens and the cable bundle.
5.
Slide the cable through the loop end at the beginning of the cable to create a lasso..
Image 3–6 Example of configuration A
6.
Pull the lasso tight around the lens body and install the U-bolt on the lens holder, with the open ends
oriented outwards (reference 3). Make sure that both a part of the loop end and the outgoing part of the
safety cable are placed in the enclosure.
Summary of Contents for G50
