Barco FSN Series, User Manual

Page: 86 / 344

86 FSN Series • User’s Guide
3. Control Panel Orientation
Control Panel Rear
`çåíêçä=m~åÉä=oÉ~ê=
The figure below illustrates the rear of the control panel:
Figure 3-23. Control Panel Rear
Following are descriptions of each rear panel connector:
1) Light Connectors
One XLR Connector is provided on each side of the rear panel for the low-
voltage “script” lights. The knob marked “ Light ” on the top of the control panel
adjusts the brightness.
2) Mouse Port
The Mouse Port is not supported. If required, use an available USB port for a
mouse connection.
3) Keyboard Port
The Keyboard Port is not supported. If required, use an available USB port for a
keyboard connection.
4) Com Ports
The two 9-pin D Com connectors are not used.
5) VGA Connector
One 15-pin D VGA connector is provided for the control panel’s analog output.
The output enables you to view the menu system on an external non-touch screen
monitor, if required. In Appendix A, refer to the “
Analog 15-pin D Connector ”
section on page 314 for pinout details.
100 - 240 VAC
50 - 60 Hz
2.3A
12V DC OUT 1.5A CPU
Ethernet
Port 1
Ethernet
Port 2
Light Light
1 1
2 4 10 14 3 6 12
5 7 8 9 11
13
1) Light Connectors 6) DVI Connector 11) DC Power Out
2) Mouse Port 7) CPU Switch 12) Audio Connectors
3) Keyboard Port 8) Ethernet Port 1 13) Fan
4) Com Ports 9) Ethernet Port 2 14) AC Power
5) VGA Connector 10) USB Ports