Barco FSN Series, User Manual

Page: 60 / 344

60 FSN Series • User’s Guide
3. Control Panel Orientation
Control Panel Descriptions
3) PGM Transition Section
For the switcher’s primary output, the PGM Transition Section enables you to
perform manual or automatic cuts, mixes, wipes and a DSK (downstream key). A
downstream “fade to black” is also provided. Refer to the “
PGM Transition
Section ” on page 65 for complete details.
4) M/E Bank
On the FSN-150, the M/E Bank includes three buses: BG (Background), PST
(Preset) and KEY . These buses are the locations where you select sources to
include in transitions and effects.
Each button on the M/E bank includes an integral multi-color LED, which is used
to indicate various source states. Directly above the top
Key Bus is a row of
displays that you can program with source names. Refer to the “ M/E Bank ”
section on page 70 for more details.
5) M/E Transition Section
The M/E Transition Section enables you to perform manual and automatic
transitions, such as cuts, mixes, wipes and keys. Refer to the “ M/E Transition
Section ” heading on page 72 for details.
6) Aux Section
The Aux Section enables you to assign sources to Aux buses. The FSN Series
includes six “native” Aux bus outputs as standard, plus a variety of optional Aux
outputs, both scaled and native. Refer to the “
Aux Section ” heading on page 78
for details.
7) Custom Control Section
The Custom Control Section provides eight assignable buttons that can be
programmed to perform various switcher functions. See the “ Custom Control
Section ” heading on page 80 for details.
8) Memory Section
The Memory Section enables you to store panel setups (and many other
switcher functions) into memory registers, and recall setups from memory back to
the panel. One thousand registers are provided (1 through 1000). Refer to the
“
Memory Section ” heading on page 81 for more details.
9) Joystick
The Joystick is a three axis controller (X, Y and Z) that is used to adjust various
switcher parameters. Refer to the “ Joystick ” section on page 85 for details.
10) Light Control
One Light Control is provided, which enables you to adjust the brightness of the
script lights, which connect to the rear panel.