FSN Series • User’s Guide
51
2. FSN-1400 Orientation
Card Descriptions
aáÖáí~ä=sáÇÉç=bÑÑÉÅíë=`~êÇ
The
DVE
(Digital Video Effects) card is an optional 2-D two-channel scaler card. When a
DVE
card is installed, you can map “internal” DVE channels to the switcher, and create
PIPs to be used as straight sources or keys.
The following rules apply:
•
One
DVE
card provides two internal DVE channels. This configuration enables
you to map two single-channel DVEs to the panel, or one dual-channel DVE.
•
Similarly, two installed
DVE
cards provide four available internal DVE channels.
The configuration enables you to map the following combinations:
~
Four single-channel DVEs
~
Two dual-channel DVEs
~
Two single-channel DVEs plus one dual-channel DVE
•
The DVE output can be used on
any
switcher bank and in any keyer.
Please note:
•
An I/O card is not required with the
DVE
card
— a blank panel is installed instead.
•
Input selection for the DVE channels is performed internally. All inputs from the
NIC
s and
UIC
s can be routed to the DVE cards, and all available outputs on the
M/E Card can be routed to the DVE cards.
•
Custom Control or Aux buttons will be provided to select DVE channels, and input
assignments will be performed on the
Aux Source Row
in the normal manner.
•
LEDs on the
DVE
card’s front edge provide power and FPGA status. Refer to the
“
” section on page 55 for details.
Refer to the “
Card Slot Allocation and I/O Flexibility
” section on page 29 for details on
DVE
card configurations in the FSN-1400.
