FSN Series • User’s Guide
23
NK==fåíêçÇìÅíáçå
About the FSN Series
póëíÉã=`çåÑáÖìê~íáçå
The following topics are discussed in this section:
•
•
•
_~ëáÅ=cpk=pÉêáÉë
=
póëíÉã
Because the FSN Series uses modular components, many flexible system configurations
can be designed to suit your exact production requirements.
The basic FSN Series system consists of the following:
•
One FSN-150 control panel.
•
One FSN-1400 chassis.
•
One
System Card
(required on all systems).
•
One
Crosspoint M/E Card
(required on all systems).
•
One eight-channel
NIC
(Native Input Card).
•
One two-channel
UIC
(Universal Input Card).
oÉèìáêÉÇ=~åÇ=léíáçå~ä=`~êÇë
Required FSN Series cards are described below.
•
System Card
— this required card includes:
~
Video reference input and loop through.
~
Configurable video reference output.
~
Ethernet port (10/100).
~
One tally connector (24 contact closures).
~
One GPIO connector (four GPI ports and eight GPO ports).
In Chapter 2, refer to the “
” section on page 38 for details.
•
Crosspoint M/E Card
— This required card includes:
~
Crosspoint matrix.
~
M/E and PGM circuitry.
~
Dedicated DSK cut and fill inputs.
~
Six Aux outputs.
~
Four PGM outputs (PGM [2x], PVW and CLN).
~
Three M/E 1 outputs (PGM 1, PVW 1 and CLN 1).
~
Three M/E 2 outputs (PGM 2, PVW 2 and CLN 2).
In Chapter 2, refer to the “
” section on page 43 for details.
Optional FSN Series cards are described below.
•
NIC
(Native Input Card)
The
NIC
provides eight native video input channels, which run at the switcher's
selected native output resolution. In Chapter 2, refer to the “
”
section on page 47 for details.