Barco FLX-60 Installation Manual Download Page 66

Page: 66 / 82

5. Maintenance

5.1

Cleaning the FLX-60 pixel

AUTION

Do not use industrial grease removers. Use only materials or chemicals that are inert, nonabrasive,

noncorrosive and non marking.

AUTION

Do not use a hard bristled brush.

Necessary tools

•

Soft brush.

•

Clean cloth.

•

FLX-60 connector string.

How to clean the FLX-60 pixel?

1. Plug the FLX-60 pixel(s) on the connector string to seal off the power/data socket of the pixel. This is necessary to protect the

electronic parts inside the unit.

2. Clean the outside of the FLX-60 pixel with a soft brush and some water.

Caution:

Do not submerge the FLX-60 pixel(s) into water or other liquids.

3. Wipe dry the FLX-60 pixel(s) using a clean cloth.

Always clean all FLX-60 pixels of the system to avoid brightness differences between cleaned and uncleaned
FLX-60 pixels.

R59770419 FLX-60 12/05/2010

Summary of Contents for FLX-60



















































































Search results

Summary of Contents for FLX-60

Reviews:

Related manuals for FLX-60

Brands by name

Popular brands

Barco FLX-60, Installation Manual

Search results

Summary of Contents for FLX-60

Reviews:

Related manuals for FLX-60

Brands by name

Popular brands