1. FLM/SLM adaptor plate
1. FLM/SLM ADAPTOR PLATE
Overview
•
FLM/SLM adaptor plate introduction
•
Installation of the FLM/SLM adaptor plate
•
Stacking an SLM projector upon an FLM projector
•
Aligning stacked FLM/SLM projectors
•
Dimensions of the FLM/SLM adaptor plate
1.1
FLM/SLM adaptor plate introduction
Introduction
The FLM/SLM adaptor plate allows you to easily stack an SLM projector with a FLM projector. This light weight adaptor plate (5,1 kg)
has a triangular shape and each corner is provided with the same type of interlocking adaptor as the SLM projector. The FLM/SLM
adaptor plate has to be installed upon the FLM projector with three bolts before attaching the SLM projector. The eyebolts on top of
the FLM projector has to be removed when using the adaptor plate because the same threaded holes are used to fasten the adaptor
plate.
The design of the FLM/SLM adaptor plate makes it possible the use the built in “SKEW” adjustment of the FLM projector. This
functionality together with the adjustment possibilities of the interlocking adaptors allows a fast and easy alignment of the stacked
projectors.
Parts location
C
A
B
Image 1-1
FLM/SLM adaptor plate (
R9854490
)
A
Fixation bolt.
B
SLM interlocking adaptor.
C Guidance for FLM skew adjustment.
1.2
Installation of the FLM/SLM adaptor plate
Necessary tools
8 mm Allen key.
How to install the FLM/SLM adaptor plate upon the FLM projector ?
1. Remove the three eyebolts and the two rear interlocking adaptors on top of the FLM projector. Use for that an eight millimeter
Allen key.
R5976959 FLM/SLM ADAPTOR PLATE 24/05/2006
3
