1. FLM/SLM adaptor plate
Skew
Q
Image 1-12
6. Shift the hatch pattern of the stacked SLM projector horizontally and vertically until the outline of the hatch pattern is most sym-
metrically placed with respect to the reference hatch pattern of the FLM projector.
Note:
Note that the “Shift” function is motorized, which means that you have to access the SLM projector software, via the local
keypad or remote control unit, to operate the “Shift” function.
Shift
Image 1-13
7. Zoom the hatch pattern of the stacked SLM projector in or out until the outline of the hatch pattern matches exactly the outline of
the reference hatch pattern of the FLM projector.
Note:
Note that the “Zoom” function is motorized, which means that you have to access the SLM projector software, via the
local keypad or remote control unit, to operate the “Zoom” function.
Zoom
Image 1-14
8. If necessary, repeat from step 2 until the hatch pattern of the stacked SLM projector is perfectly aligned with the hatch pattern of
the reference FLM projector.
In case of a triple stacked table mount projector configuration adjust and align first the bottommost projector
(reference), than the projector in the middle and finally the uppermost projector.
8
R5976959 FLM/SLM ADAPTOR PLATE 24/05/2006
