![background image](http://html1.mh-extra.com/html/barco/f90-w13wuxga/f90-w13wuxga_user-manual_4186791047.webp)
5. Getting started
5.1.2.4
3G-SDI
Speci
fi
cations
Parameter
Value
Standard
SMPTE 424M-2006 10bit level A
Connectors
1x) BNC 75 ohm type IEC 60169-8, Amendment 2 1997, A
Bandwidth
>3 GHz
Return loss
>10dB at 3GHz
Impedance
75 ohm resistive
5.1.2.5
HDBase T
Speci
fi
cations
Parameter
Value
Reference speci
fi
cation
HDBaseT 1.0 Speci
fi
cation, June 2010
Connector
Standard RJ-45, 8P8C
Signal characteristics
HDBaseT
Max. cable length (1080p/48b/60Hz)
100 m (Cat5e/6), Pixel Clock <=225HHz, Video Datarate
<=5.3Gbps
70 m (Cat5e/6), Pixel Clock >225HHz, Video Datarate
>5.3Gbps
100 m (Cat6a/7), Pixel Clock >225HHz, Video Datarate
>5.3Gbps
Max TMDS Clock Frequency
270 MHz
Max video resolution supported
1920x1200 @60Hz (WUXGA 60Hz)
HDCP Pass-Through
Yes, from Source to Projector
IR Extension
Not Supported
RS-232 Extension
Not Supported
10/100Mbps Ethernet Pass-Through
Not Supported
Fallback to 100BaseTx, IEEE 802.3u
Not Supported
USB Over Centre Tap
Not Supported
Power Over Ethernet
Not Supported
Audio
Not Supported
LEDs - HD Base Status
Operation: Green, Left
Link/Mode: Yellow, Right
5.1.3
Control interfaces
About
The following control interfaces are available on the projector:
•
1x RS-232 (for projector control)
•
1x LAN/Ethernet (for projector control
•
3x USB-A ports
Overview
•
•
•
601–426 F70 SERIES 24/10/2017
43
Summary of Contents for F90 - W13WUXGA
