![background image](http://html1.mh-extra.com/html/barco/f90-w13/f90-w13_user-manual_4126017047.webp)
7. Image menu
7. IMAGE MENU
Overview
•
•
•
•
7.1
Contrast
About
Image / Contrast
Used to adjust the contrast ratio of the displayed image by applying gain to the red, green and blue signals.
Available range: 0.00 to 2.00
Default value: 1.00
7.2
Brightness
About
Image / Brightness
The brightness function is used to adjust the black level in the input picture. It adds or subtracts an offset, or bias in to the red, green
and blue signals.
Available range: –1.00 to 1.00
Default value: 0.00
7.3
Saturation
About
Image / Saturation
Saturation levels impact on the white levels and the intensity of the color display; the higher the value, the more vivid the color display
will be.
Available range: —1.00 to 1.00
Default value: 0.00
7.4
Advanced image adjustments
About
Image / Advanced
Advanced image adjustment settings that enable greater control, particularly during calibration.
Not all settings are available for all source types. Settings that are not available for the active source will be
grayed out and not available for selection.
P7 RealColor
Advanced functionality for color management.
Image / Advanced / P7 RealColor —>White point
601–0400–00 F90–W13 18/08/2016
43
Summary of Contents for F90-W13
