Barco F90-W13, User Manual, Page: 21 / 57

2. Getting to know the projector
Image 2-5
Name Description
DMX DMX512 input
RS-232 9–pin DB9 connector
Sync BNC Sync Port IN/OUT; Bidir mini-DIN
Trigger 12VDC - 0,5A (6W)
RC XLR connector for wired remote
USB USB 2.0 type A, 4 pin
LAN Standard RJ45 connector
DP Standard display port
DL-DVI-D Dual DVI-I 1.0 (DVI_D Functionallity)
HDMI Standard HDMI 2.0
HDBaseT Standard RJ45 8P8C Connector
SDI SDI1 is Input, SDI 2 is pass through. (out)
Connectors
2.8 Color Wheels
Overview
• Color Wheel range
• Change the color wheel
2.8.1 Color Wheel range
About
The F90 is delivered with two (2) different color wheels: COLOR and BRIGHTNESS.
COLOR delivers great depth of color and a broad gamut.
BRIGHTNESS provides an extra boost to white segments and very good primary and secondary colors, which makes it ideal for
brightness critical applications.
The F90 is designed so that users can change the color wheel quickly and easily whilst on site, without the use of special tools.
2.8.2 Change the color wheel
C
AUTION
:
The F90 contains no user serviceable parts except the Color Wheel. Attempts to modify/replace
mechanics or electronics inside the housing or compartments will violate any warranties and may be haz-
ardous.
C
AUTION
:
When placing the projector on the right side for colorwheel replacement, ensure that the projector
are properly secured in this position. Ensure also that the surface used for this operation is suitable with
respect to
fl atness. It may result in great danger to personnel and equipment if the projector overturning from
the upright position.
601–0400–00 F90–W13 18/08/2016 17