3. Getting started
Barco – Eos Workstation for Windows – DOC-3062-2 – Revision 12 – August-2004
____________________________________________________________________________
3-7
3.1.2
Eos Extender
E
OS
offers five or six PCI slots.
These slots are used by expansion cards of Barco (e. g., graphic cards, O
MNI
S
CALERS
,
video and RGB input cards). When connecting to larger display walls and displaying several videos simultane-
ously the number of slots in E
OS
may not be big enough. The E
OS
E
XTENDER
extends E
OS
by adding 13 PCI slots. Thus
a bigger number of projection cubes or more input sources can be connected. It is available with a standard
power supply or a redundant hot plug power supply.
Front – Eos Extender 13 slots
The E
OS
E
XTENDER
looks like this or similar:
1
3
4
2
1
On/Off-
switch
2
buzzer reset button: power module failed
(only used with redundant power supply)
3
LED: power on
4
LED: power module failed
(only used with redundant power supply)
Figure 3-6
Front of the Eos
E
XTENDER
On the front of the E
OS
E
XTENDER
behind the lockable flap on the lowest position, there is the
On/Off
-switch [1].
On the top position is a
buzzer reset button
[2] for power module failure of a redundant power module. Be-
tween these two buttons there are two LED’s, the green LED
power on
[3] to the left is indicating if power is on.
The red LED
power module failed
[4] to the right indicates that a redundant power module is not operable,
please refer to section
