Barco E192HSA, User Manual

Page: 25 / 50

5. Advanced operation
4. Select one of the available color temperature presets and con fi rm.
Note: If you selected the User color temperature preset, a new menu will be displayed allowing you to
manually adjust the gain and offset of red, green and blue.
5.1.6 Gamma
About gamma presets
The available gamma presets for your display are:
• CRT (the display follows the response curve of a CRT)
• Native (no correction curve is applied)
• X-ray (grayscale levels are mapped according to the DICOM curve in an approximate way)
To select a gamma preset
1. Bring up the OSD main menu.
2. Navigate to the Picture menu.
3. Enter the Gamma submenu.
4. Select one of the available gamma presets and con fi rm.
5.1.7 Sharpness
To adjust the sharpness level
1. Bring up the OSD main menu.
2. Navigate to the Picture menu.
3. Enter the Sharpness submenu.
The command bar Sharpness is highlighted.
4. Set the sharpness level as desired and con fi rm.
5.2 Picture Advanced menu
Overview
• Black Level
• Smart Video
• Image Position
• Auto Adjustment
• Phase
• Clock/Line
5.2.1 Black Level
About black level
This command allows to add or subtract an offset to the input video signal (available only on video formats).
To adjust the black level
1. Bring up the OSD main menu.
2. Navigate to the Picture advanced menu.
3. Enter the Black Level submenu.
The command bar Black Level is highlighted.
K5902113 ( 451920611383 ) E192HSA 27/11/2017 23