![background image](http://html.mh-extra.com/html/barco/duet-ii/duet-ii_owners-manual_474040019.webp)
3. Connections
Adjust the Stereo Select to get a correct Stereo Projection Set Up (see "Edit File", page 33).
How to connect to the Stereo Input?
1. Connect the Stereo Signal sent by the Image Generator to the Stereo Input on the BARCO Duet II. (image 3-10)
Image Generator
Barco Duet II
MAINS
COMMUNICATION
STEREO
G
B
H/C
G
B
H/C
G
B
H/C
DVI OUT
DVI OUT
RS 232 IN
RS 232 OUT
R
V
R
V
TO PROJECTOR 1
R
V
TO PROJECTOR 2
INPUT
ID BIT IDENTIFICATION
Image 3-10
Stereo Input
3.7
ID Bit Identification
What is done?
Some Image Generators (IG) need to know which type of ’monitor’ is connected, in case no monitor ID bits are detected, no image is
sent to the RGB outputs on the IG. These ID bits are emulated by the BARCO Duet II and sent to the IG using the ID Bit Identification
connection.
How to connect to the ID Bit Identification?
1. Connect the ID Bit Identification output on the BARCO Duet II to the Image Generator. (image 3-11)
R5976550 BARCO DUET II 10/05/2007
15