![background image](http://html1.mh-extra.com/html/barco/dp4k-l-series/dp4k-l-series_installation-manual_4103615017.webp)
1. DP4K-L series accessory kit
1.10 Installing the castor wheels
C
AUTION
:
Only use castor wheels in case the surface where the chiller will stand is
leveled.
C
AUTION
:
Do not stack chillers with castor wheels mounted!
Necessary tools
•
Open end wrench 17 mm
•
Forklift
How to install the castor wheels on the chiller
1. Raise the chiller without tilting about 25 cm above the
fl
oor. Use a forklift.
Caution:
Do not tilt the chiller!
2. Turn the four feet out of the chiller bottom plate. Use a 17 mm open end wrench to loosen the lock nut
of the foot.
3. Screw in the castor wheels. Use 17 mm open end wrench to fasten the castor wheel.
Image 1-17
R5905882 DP4K-L ACCESSORY KIT 06/09/2017
13