![background image](http://html1.mh-extra.com/html/barco/dp2k-slp-series/dp2k-slp-series_user-and-installation-manual_474005139.webp)
15. Removal and installation of the projector covers
15.4 Removal of the left side cover
W
ARNING
:
Switch off the projector prior to starting with this procedure, unless otherwise speci
fi
ed in the
procedure.
Necessary tools
Flat screwdriver 7 mm
How to remove the left side cover?
1. Release the small dust
fi
lter assembly from the front side of the projector. Use 7 mm
fl
at screw driver to loosen the captive screw
(reference 1 image 15-4) of the small dust
fi
lter assembly.
Note:
The left side cover is partial captured by the sheet metal of the small
fi
lter assembly. For that, this
fi
lter has to be (partially)
removed
fi
rst.
1
Image 15-4
2. Loosen the
fi
ve captive screws (reference 2 image 15-5) of the left side cover using a 7 mm
fl
at screwdriver.
3. Remove the left side cover from the projector.
1
2
Image 15-5
R5906847 DP2K SLP SERIES 02/06/2017
135
Summary of Contents for DP2K SLP Series
