Barco DP2K SLP Series, Service Manual

Page: 192 / 410

R5906848 /04 DP2K SLP Series 192
6. Secure tightly the motor unit using a 2.5mm Allen wrench as indicated in Image 16-35. Bond the head of
screws not to loosen those.
7. Attach the connector plate to the lens mount and secure it tightly with 2 hex socket screw M3x3 (reference 1
Image 16-36). Use a 2.5mm Allen wrench. While securing adjust position of the connector plate along the
black line drawn on the plate as indicated with reference 3 in Image 16-36. Bond the head of screws not to
loosen those.
3
1
Image 16-36
16.14 Replacement of the motor assembly for 0.69"
DC2K lenses (Type 'F')
To know which type of lens motor assembly is mounted on the projection lens see chapter
“ Available lenses ” , page 174.
How to replace the lens motor assembly?
1. Remove the lens from the projector.
2. Remove the front cover (reference 2 Image 16-37) of the lens motor assembly by releasing the three screws
(reference 1 Image 16-37) as illustrated.
3. Remove the top cover (reference 4 Image 16-37) of the lens motor assembly by releasing the two screws
(reference 3 Image 16-37) as illustrated.
1 3 2
4
Image 16-37
4. Detach the lens motor assembly from the projection lens by releasing the three screws (reference 5 Image 16-
38) as illustrated.
Lens Holder