![background image](http://html1.mh-extra.com/html/barco/dp2k-series/dp2k-series_user-manual_474003150.webp)
5. Installation
5.8
Automation
Overview
•
•
•
5.8.1
General purpose inputs con
fi
guration
What is possible
This interface enables the user to con
fi
gure the automation system that is present inside the projector
(standard GPI con
fi
guration). The touch panel enables the user to couple a macro
fi
le to a rising edge or
falling edge on one of the inputs of the GPI connector (DB37).
GPI 1 and GPI 2 are reserved for 3D purposes and cannot be changed by the user.
GPI 1 : rising edge triggers the 3D L/R input reference. This reference indicates which
frame is Right and which frame is Left depending and the used polarity. For more info,
see 3D settings.
GPI 2 : rising edge triggers the 3D L/R display reference. It is used to specify which
frame of eye data is to be displayed during a speci
fi
c display frame.
How to associate a macro
1. While in
Installation
, tip on
Automation
.
The automation overview window is displayed.
2. Tip on tab
GPI con
fi
guration
(1). (image 5-26)
3. Select the desired GPI to update the falling edge macro and/or the rising edge macro (2) and tip on
Edit
(3).
The macro association window opens (4).
4. Tip
Change
next to falling or rising edge (5).
The select a macro window opens (6).
5. Select the desired macro
fi
le (7) and tip
OK
(8).
The selected macro is added in the macro association window (9).
6. If necessary, repeat for the other edge and
fi
nally tip
Apply
(10).
The associations are
fi
lled out in the automaton window.
146
R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012
Summary of Contents for DP2K Series
