![background image](http://html1.mh-extra.com/html/barco/dp2k-s-series/dp2k-s-series_user-and-installation-manual_4093724096.webp)
12. Lamp House & Lamp replacement
5
Image 12-31
9. Secure the xenon lamp cathode with the hexagon socket head cap screw (reference 1 image 12-32), spring washer (reference
2 image 12-32 and plain washer (reference 3 image 12-32). Fasten the screw with a torque of
2.5Nm
(1.84 lbf*ft). Use a torque
wrench with a 5 mm Allen socket.
Caution:
Make sure that both pins (reference 11 image 12-32) of the cathode adapter remain engaged in the foreseen slots.
3
1
2
11
.5 Nm
2.5
.5
2.5 Nm
Image 12-32
10.Install the side cover of the Lamp House and fasten the three quarter turn screws (reference 4 image 12-33) of the cover.
Note:
Please ensure that the quarter turn screws turning wires are
fl
ush with the cover or interference will occur while inserting
the Lamp House into the projector.
4
Image 12-33
92
R5977692 DP2K-S SERIES 10/12/2012
Summary of Contents for DP2K-S Series
