![background image](http://html1.mh-extra.com/html/barco/dp2k-s-series/dp2k-s-series_user-and-installation-manual_4093724040.webp)
7. Input & Communication
7.1
Introduction
General
The Input & Communication side of the DP2K-S series projector consists of a Local Keypad integrated into the projector housing
and a card cage with three slots. The rear side of the projector is equipped with a tail light which re
fl
ects the status of the projector.
The card cage contains from top to bottom:
•
Integrated Cinema Processor (ICP)
•
Input slot which supports:
-
Barco HDSDI input module.
-
Integrated Media Block (IMB).
-
Integrated Media Server (IMS).
•
Barco Cinema Controller
5
1
2
3
4
6
Image 7-1
1
Local Keypad.
2
Integrated Cinema Processor (ICP).
3
Input slot for IMB, IMS, or HDSDI module.
4
Cinema Controller.
5
Tail light (projector status).
6
Power ON/OFF switch.
C
AUTION
:
A unit may only be removed from the card cage by quali
fi
ed service personnel. Removing the ICP
board (reference 2 image 7-1) or the IMB/IMS/HDSDI board (reference 3 image 7-1) will result in an authorization
request upon starting
36
R5977692 DP2K-S SERIES 10/12/2012
Summary of Contents for DP2K-S Series
