![background image](http://html1.mh-extra.com/html/barco/dp2k-19b/dp2k-19b_installation-manual_4105057033.webp)
4. Lamp & Lamp House
4. LAMP & LAMP HOUSE
W
ARNING
:
DO NOT PERMIT UNAUTHORIZED PERSONNEL TO PERFORM OR ATTEMPT ANY PHASE OF
XENON LAMP HANDLING OR SERVICE. ONLY TRAINED AND QUALIFIED TECHNICAL SERVICE PERSONNEL
ARE ALLOWED TO HANDLE THE XENON LAMP.
C
AUTION
:
Xenon compact arc lamps are highly pressurized. When ignited, the normal operating temperature
of the bulb increases the pressure to a level at which the bulb may explode if not handled in strict accordance
to the manufacturer’s instructions. The bulb is stable at room temperature, but may still explode if dropped or
otherwise mishandled. Whenever the lamp house, containing a xenon lamp, has to be dismantled or whenever
the protective container or cloth has to be removed from the xenon lamp, authorized protective clothing MUST
be worn!
W
ARNING
:
Always wear face protection (full face shield with neck protector) when handling xenon lamps.
W
ARNING
:
Always wear protective clothing (welder’s jacket) when handling xenon lamps.
W
ARNING
:
Always wear clean leather gloves with wrist protectors when handling xenon lamps.
Overview
•
•
Supported xenon lamps for the S/M Lamp House
•
•
Removal of the xenon lamp from manual S/M Lamp House
•
Installation of the xenon lamp in manual S/M Lamp House
•
Installation of the Lamp House
•
•
Realignment of the lamp in its re
4.1
Introduction
Lamp and Lamp House
The DPxK-19B/23B/P projector is delivered with a manual or motorized
S/M Lamp House
without lamp. The xenon bulb lamp is
delivered separately and has to be installed on site by a quali
fi
ed service technician.
The xenon bulb lamp is packed in a protective container or wrapped in a protective cloth. Never remove this protective container or
protective cloth without wearing adequate protective clothing (face shield, clean cotton gloves, welder’s jacket).
Image 4-1
Left: Xenon lamp in protective container. Right: Xenon lamp wrapped in protective cloth.
R5905067 DPXK-19B/23B/P 17/09/2012
27
Summary of Contents for DP2K-19B
