![background image](http://html1.mh-extra.com/html/barco/dp2k-12c/dp2k-12c_service-manual_4083615124.webp)
6. Lamps and lamp houses
6
7
Image 6-44
7. Place a new re
fl
ector assembly upon the anode side of the lamp house and fasten with 8 hexagon head cap screws (reference
7 image 6-44). Use a 2,5 mm Allen wrench. These screws must have a length of 10 mm. Make sure to position the re
fl
ector
assembly correctly.
Caution:
Do not touch the glass of the re
fl
ector assembly. Hold fast the re
fl
ector assembly by its metal mounting plate.
8. Reinstall the cathode side of the lamp house (see middle drawing of image 6-44). Fasten with 8 hexagon head cap screws
(reference 6 image 6-44). Use a 2,5 mm Allen wrench.
9. Reinstall the bottom pro
fi
les. See image 6-43. Use a 2,5 mm Allen wrench.
10.Guide the cathode wire inside the lamp house as illustrated.
Image 6-45
11.Reconnect the cathode wire with the lamp house. Make sure to place a washer (reference 2 and 4 ) between the nuts and the
eye of the cathode wire (reference 3). Use a torque of 9 Nm to fasten the nuts (reference 1 and 5). Block the
fi
rst nut (reference
1) with a 17 mm open-end wrench while applying a torque of 9 Nm on the second nut (reference 5) with a torque wrench.
1
2
3
4
5
9 Nm
9 Nm
Image 6-46
12.Reinstall the side cover of the lamp house.
120
R5905043 DP2K-12C/11CX 19/02/2018
Summary of Contents for DP2K-12C
