![background image](http://html1.mh-extra.com/html/barco/dp2k-12c/dp2k-12c_installation-manual_3917263039.webp)
4. Lamp & Lamp House
Image 4-23
Close side cover
C
AUTION
:
The “LAMP INFO” parameters MUST be updated after each installation of a xenon lamp inside the
lamp house. Neglecting this update will result in poor performance and short life time of the xenon lamp. See
procedure “Resetting the lamp parameters”.
A realignment of the xenon lamp in its re
fl
ector is required after the installation of the xenon lamp in the lamp
house. See procedure "Realignment of the lamp in its re
4.5
Installation of the lamp house
W
ARNING
:
This procedure may only be performed by quali
fi
ed technical service personnel.
C
AUTION
:
Due to its high internal pressure, the lamp may explode in either hot or cold states if improperly
handled.
Necessary tools
Flat screw driver.
How to install the lamp house
1. Ensure the projector is switched off.
2. Remove the lamp cover.
3. Hold fast the lamp house by its handles and gently slide the lamp house into its socket. Note that the compartment is provided
with guides (G) to position the lamp house correctly.
R5905050 DP2K C-SERIES 10/07/2012
33
Summary of Contents for DP2K-12C
