Display resolution
118
Coronis 5MP Mammo
Setting the resolution of your Coronis 5MP
Mammo display
In order to set the resolution of your Coronis 5MP Mammo display
you must be logged in using an account with administrator
privileges.
1.
To set the resolution of your Coronis 5MP Mammo display(s)
right
click
on the desktop and
select
“Properties”
.
2.
Select
the
“Settings”
tab.
3.
Select
the
rectangle
that represents the first Coronis 5MP Mammo
display attached to the BarcoMed 5MP2FH Display Controller you
are working with.
NOTE:
If you are using the VGA capabilities of your BarcoMed
5MP2FH Display Controller, the resolution for the first display may
be set to a VGA resolution of “640 x 480” pixels with 16 colors and
a default refresh rate. If your BarcoMed 5MP2FH controller is not
running VGA, the display may not be enabled yet. To enable the
display,
check
the
“Extend my Windows desktop onto this
monitor”
checkbox, but do
NOT
click the
“Apply”
button at this
time.
If you installed your BarcoMed 5MP2FH drivers in
SingleView
mode (default for Windows 2000) there will be one rectangle for
the virtual display representing the two heads controlled by each
BarcoMed 5MP2FH display controller.
If you installed your BarcoMed 5MP2FH drivers in
DualView
mode
(default for Windows XP) there will be a rectangle representing
each head controlled by each BarcoMed 5MP2FH display controller.
This will be true even if you have only one display connected to
your BarcoMed 5MP2FH controller. Both displays of a display
controller cannot be enabled at the same time unless their display
properties match. If necessary detach the second display of the
BarcoMed 5MP2FH Display Controller you are working with by
right clicking
on the rectangle that represents it,
deselect
“Attached”
and
click
the
“Apply”
button.
Summary of Contents for Coronis 5MP Mammo
