Barco Coronis 3MP LED MDCG-3221, User Manual

Page: 11 / 56

K5902060 /09 Coronis 3MP LED Display
11
2.3 Removing the connector compartment cover
To remove the connector compartment cover
1. Gently push the two lips on top of the cover
2. Pull the top of the cover slightly away from the display and lift the cover upwards.
Image 2-3
2.4 Connecting the signal cables
CAUTION: Only connect one of the two video links. Connecting both inputs simultaneously will
result in driver errors.
To connect the signal cables to the display:
To get access to the connectors, remove the connector compartment cover. See “ Removing the connector
compartment cover ” , page 11.
You may connect the display to a display controller by using the DVI or the DP connection. The input selection
of the device is automatically done. By default, the DisplayPort input has priority over the DVI input. This can
be changed in the OSD menu.
1. Connect the DVI or DP of the display controller to the DVI or DP connector of the display.
Image 2-4
Display installation