3. Installation
3. INSTALLATION
3.1 Mounting the waterproof housing
How to mount ?
1. Put one part of the cable sealing around the cable (1).
2. Place a second cable sealing part on the first one (2). (image 3-1)
3. Close the sealing with 2 wire ties. (image 3-2)
Tip:
Try to place the junction of the wire tie somewhere at the side. It makes the closing of the housing easier.
4. Repeat those actions for the other cable end.
5. Make the connection. Plug in and secure with the hand screws. (image 3-3)
6. Insert both sides of the connection into the waterproof housing. Be aware that the grooves in the sealing matches the opening
in the waterproof housing. (image 3-4)
7. Place the second part of the housing on the first part and pull until the housing is completely closed.
8. Secure by turning the hand screws (on both sides of the housing) a quarter turn anti clockwise. (image 3-5, image 3-6)
Tip:
Use the velcro strip to make a loop so that the housing can be attached somewhere.
(1)
(2)
Image 3-1
Mount cable sealing
R5976867 COMPACTLINK 03/03/2005
5
