6
CLM W6
1. Safety
To prevent personal injury
Caution: High pressure lamp may explode if improperly handled. Refer servicing
to qualified service personnel. The customer should never attempt to disas
-
semble the lamp casing or to dispose of the lamp casing other than by returning
it to Barco.
To prevent injury and physical damage, always read this manual and all labels
on the system before inserting the lamp casing, connecting to the wall outlet or
adjusting the projector.
To prevent injury, take note of the weight of the projector. Minimum 2 persons
are needed to carry the projector.
To prevent injury, ensure that the lens and all cover plates are correctly installed.
See installation procedures.
Warning: high intensity light beam. NEVER look into the lens ! High luminance
could result in damage to the eye.
Before attempting to remove any of the projector’s covers, you must turn off the
projector and disconnect from the wall outlet.
When performing setup work to a ceiling mounted projector, to prevent injury
caused by falling objects or the system, set out a keep out area.
Consult a professional structural engineer prior to suspending the projector from
a structure not intended for that use. Always ensure that the working load limit of
the structure can handle the load of the projector.
Never stack more than two (2) CLM projectors in a hanging configuration (truss)
and never stack more than three (3) CLM projectors in a base stand configura
-
tion (table mount).
The power input at the projector side is considered as the disconnect device.
When required to switch off the projector, to access parts inside, always discon-
nect the power cord at the projector side. In case the power input at the projec-
tor side is not accessible (e.g. ceiling mount), the socket outlet supplying the
projector shall be installed nearby the projector and be easily accessible, or a
readily accessible general disconnect device shall be incorporated in the fixed
wiring.
Do not place this equipment on an unstable cart, stand, or table. The product
may fall, causing serious damage to it and possible injury to the user.
When mounting the projector to the ceiling or to a rigging system, always mount
security chains.
