Barco CineVersum 120, Owner'S Manual

Page: 15 / 43

3. Overview User’s Controls
Image 3-4
Master control via 2-way communication SL/XL cable
Backlighting
When a button on the remote control is pressed, backlight is activated automatically. That allows the user to operate the remote
control in a dark room. Backlight is turned off automatically a few seconds after the last button activation.
If backlight and RC operation indicator lights up too long or continuously, batteries need to be replaced.
Factory address setting of the modules
The factory address setting of the modules is as follows:
Module Individual Address Common Address
Cine VERSUM 120
address <9> no common address
Cine VERSUM Master address <1> common address <0>
Common address: is a fixed address, stored in the module. The module will execute the commands sent by
a Remote Control, programmed with the common address <0>.
3.4.2 Battery Insertion in the Remote Control
Where to find the batteries
The batteries are not placed in the remote control to avoid remote control operation in its package, resulting in a shorter battery life
time.
How to install the batteries
1. Push the cover tab (A) with the fingernail a little backwards and pull upwards the cover top (B). (image 3-5)
2. Slide the cover forwards to remove. (image 3-6)
3. Push the battery body towards the spring and lift it up to remove. (image 3-7)
R5976667 CINEVERSUM SYSTEM 01102003 11