![background image](http://html1.mh-extra.com/html/barco/cineversum-120/cineversum-120_owners-manual_4007649016.webp)
3. Overview User’s Controls
4. Insert two AA size batteries, making sure the polarities match the + and – marks inside the battery compartment (image 3-7).
5. Insert the lower tab of the battery cover in the gap at the bottom of the remote control, and press the cover until it clicks in place
Image 3-5
Battery cover unlock
Image 3-6
Battery cover removal
Image 3-7
Battery removal
How to reinstall the address
By removing the batteries, the address in the Remote Control will be set to 0. In case the different modules are controlled separately
(own address), the respective address of the module you desire to control has to be set. To reinstall an address, follow procedure
below:
1. Point the Remote Control to the module of which you want to know the address and press the address button (use a pencil).
On the screen appears a message box (image 3-9) indicating the address number. In the graphical display of the Cine VERSUM
Master appears the same message (image 3-10).
2. To adapt the address in the Remote Control, cover the IR transmitting diodes and press the address button once, followed within
the 5 seconds by pressing the corresponding digit button, 1 to 8.
Image 3-8
Image 3-9
Message address on-screen
12
R5976667 CINEVERSUM SYSTEM 01102003
Summary of Contents for CineVersum 120
