![background image](http://html1.mh-extra.com/html/barco/cineversum-110-r9010120/cineversum-110-r9010120_owners-manual_4013390051.webp)
6. Source Selection
4. Use the arrow keys to select the Extended check box.
5. Press
ENTER
to disable or enable the extended mode.
Check
Extended
to switch to extended mode.
Uncheck
Extended
to switch to standard mode.
Image 6-5
How to select an input on the Video Selector
1. Use
←
or
→
to browse through the different inputs.
2. Press
ENTER
to select.
Use
MENU
or
BACK
to exit the Video Selector.
Graphical interface
B
C
D
E
A
A
B
C
D
E
Image 6-6
A BNC or S-Video connector on the video selector can be in one of following conditions:
•
A: connector disabled
•
B: connector enabled but inactive (no video signal present on connector)
•
C: connector enabled & active (video signal present on connector)
•
D: connector enabled active & selected
•
E: connector enabled & active & focused (browser positioned on connector)
A source can also be selected via the dedicated key 9 on the RCU. Key 9 allows to browse through the active
inputs.
R5976697 CINEVERSUM™ 110 06012004
47
Summary of Contents for CineVERSUM 110 R9010120
