![background image](http://html.mh-extra.com/html/barco/cine-versum-120/cine-versum-120_owners-manual_473934012.webp)
3. Overview User’s Controls
Image 3-2
Cine VERSUM 120 controls
Controls function description
Ref.
Function
Description
1
Main power switch
Button pressed, switches the projector in the ’Standby’ mode. This mode
is indicated by the standby LED which lights up repeatedly 2 times short
on, 1 time long off.
2
Infra Red Receiver
Reception diode for the IR signals from the Remote Control. Allows
switching On/Off (Standby) of the projector separately and controlling
the Cine VERSUM Master.
3
Standby LED
Lights up continuously: projector in the operation mode.
Lights up repeatedly 2 times short on, 1 time long off: projector in the
standby mode
Blinks fast: projector in the cooling down mode after switching off
(duration 1 min.).
Lights up repeatedly 1 time long, 1 time short: projector has been started
up in the cooling down mode, waiting for lamp ignition.
4
Not used
5
Infra Red Reception LED indicator
Lights up when a valid IR signal from the Remote Control has been
captured.
Table 3-2
3.3 Remote Control
Top side
The Infra Red Remote Control buttons support the following functionality:
8
R5976667 CINEVERSUM SYSTEM 01102003
Summary of Contents for Cine VERSUM 120
