6. Image Control
Image 6-3
Image 6-4
6.3 Color (Saturation) Control
How to adjust the Color (Saturation)
The Color function is used to adjust color saturation levels and is only active for Video and S-Video sources.
To adjust Color, press the
(+)
or
(-)
side of the button ’
COLOR
’ (image 6-5). The following barscale is overlayed on the source image,
Press the
(+)
or
(-)
button until the desired color saturation level is displayed. If color is set to a 0% level, the result will be black and
white picture. If the color is set too high, the color levels in the image will be over-powering.
Image 6-5
Image 6-6
24
R5976667 CINEVERSUM SYSTEM 01102003
Summary of Contents for Cine VERSUM 120
