Barco C5011S, Installation Manual

Page: 94 / 158

R5900120 /03 ClickShare CX-50 Gen2 94
Audio output
Audio can be enabled by checking the check box before
Enable audio
.
When an USB speakerphone is connected to your device, this device will be the default audio output device
for both conference and content audio an it will not be possible to configure HDMI, DP or audio jack as audio
output. USB is by default selected and cannot be changed.
When no USB speakerphone is connected with your device, you can configure the audio output and select
HDMI or DP or audio jack.
The UI illustration image shows a device with USB speakerphone connected.
Since all audio is played out and captured from the echo-cancelling speaker, the peripheral will
cancel out the content audio. Users will have to enable audio sharing into the call when playing
content with audio. This can be selected in the different tools when sharing.
1. Log in to the
Configurator
.
2. Click
Display & Audio
→
Outputs
.
Image 5–14 Display setup, output
3.
To activate the screen saver, drag the slider bar to the left or to the right until the desired delay time is
reached.
When the slider is set completely to the left, the screen saver will never be activated.
CX-50 Gen2 Configurator