Barco C5011S, Installation Manual

Page: 36 / 158

R5900120 /03 ClickShare CX-50 Gen2 36
3.10 Display connection to the Base Unit
Ways to connect a display to the Base Unit
Way 1: Connect your display via a HDMI cable to the Base Unit.
Way 2: For displays who support video via USB, connect your display via an USB cable to the USB Type C
port of the Base Unit.
Way 3: For dual display, connect one display with the HDMI output of the Base Unit and connect the second
display to the USB Type C port of the Base Unit.
Connection via HDMI
1. Connect the Base Unit to the display using a HDMI cable.
Note: No display cables are included in the ClickShare box at purchase.
HDMI OUT
Image 3–6
When setting up a display configuration, connect the HDMI cable to the display. When necessary, use an
adapter piece to connect to a display port or a DVI port on the display side.
To guarantee picture quality, 4K capabilities and limit EMC exposure 360-degree bond shielding
HDMI cables supporting the HDMI 2.0 specification should be used.
Connection via USB
1. Connect the USB Type-C port at the backside of the Base Unit to the USB input of the display (only for
displays supporting video via USB).
Check Barco’s website for the full list of supported/adviced cables.
CX-50 Gen2 Installation