Barco BARON 908, Installation Manual, Page: 35 / 50

Tilting the projection table
7 - 1
5976418 BARON 908 04122001
Tilting connections
Connecting the tilting sensors
1 Connect the Sub D9 connector with the grey cables to the corresponding projector input (image 7.1).
2 Connect the 5 pin connector to the corresponding projector input (image 7.1).
3 Connect the 8 pin connector to the control unit located in the control box (image 7.1).
4 Put the protection plate of the control box back and secure with the 2 screws.
TILTING THE PROJECTION TABLE
7
COMM. PORT
REMOTEREMO
TE
IRIR RS 232 OUTRS 232 OUT RS 232 INRS 232 IN
PORT 3
COMM. POR T PORT 3
ON OFF
ON OFF
POWER MAINS
POWER MAINS
800 periphals
800 periphals
image 7.1
Tilting sensors connections
Control box
Projector
Control unit
SUB D9
to projector
5 pins to
projector
8 pins to
control unit