![background image](http://html1.mh-extra.com/html/barco/barcoreality-sim6-ultra-r9040150/barcoreality-sim6-ultra-r9040150_user-manual_473908245.webp)
2. RS232 Commands
2.186 Orientation (Configuration), Write
Description
Write the orientation (configuration) to the projector.
Command
Command [0]
\x20
Command [1]
\x24
Data
Data [0]
Orientation (Configuration):
•
\x40
= Front/Table
•
\x80
= Front/Ceiling
•
\x00
= Rear/Table
•
\xc0
= Rear/Table
Example
Set the Orientation (Configuration) of a projector with address
\x01
to Front/Ceiling.
Transmit
Start
\xfe
Projector Address
\x01
Command [0]
\x20
Command [1]
\x24
Data [0]
\x80
\x00
Checksum
\xc5
Stop
\xff
Receive (Acknowledge)
Start
\xfe
Projector Address
\x01
Command [0]
\x00
Command [1]
\x06
Checksum
\x07
Stop
\xff
R5976538 BARCOREALITY SIM6 ULTRA SERIES 08/06/2005
241